Undergraduate Catalog
WIU Home > Catalog > 2026 - 2027 > Courses
CONSTRUCTION MANAGEMENT (CSTM) Course Descriptions
132 Introduction to Construction Management. (3) Introduction to the field of Construction and Facilities Management. Includes the study and application of methods, systems, processes, tools, and equipment that are common to current industry practices in the built environment. Laboratory charge for course. 2 hrs. lect.; 2 hrs. lab.
230 Construction Documents and Plan Reading. (3) A comprehensive study of the common construction documents including plan reading methodologies, bid documents, addenda, and basic quantity take-off of construction materials. Prerequisite: MATH 113 with a grade of C- or better, or permission of instructor. 3 hrs. lect.
234 Construction Systems and Concepts. (3) Construction systems and concepts including relationships between materials used in construction. Content includes basic materials used in residential and commercial structures. Prerequisite or Corequisite: CSTM 132. 3 hrs. lect.
236 Surveying for Construction. (3) An introduction to surveying methods used in the construction industry. Students will learn surveying techniques for roads and building sites. Conventional as well as electronic surveying equipment will be used. Not open to students with credit in AGTM 461. Prerequisite: MATH 113 with a grade of C- or better, or permission of instructor. Laboratory charge for course. 2 hrs. lect.; 2 hrs. lab.
260 Construction Statics and Strength of Materials. (3) A study of structural factors that influence the development of building design. Survey of statics and strength of materials with an introduction to structural planning and preliminary structural design for temporary structures related to Construction Management. Prerequisite: MATH 113 with a grade of C- or better, or permission of instructor. 3 hrs. lect.
301 Residential Architectural Design. (3) The study of residential architectural design including drawing setup, architectural programming, site plan, floor plan layouts, elevation, construction details, and 3D modeling using current industry software. Provides students with the foundational knowledge of blueprint creation for residential building construction projects. Prerequisite: ET 105. Laboratory charge for course. 2 hrs. lect.; 2 hrs. lab.
302 Commercial Architectural Design. (3) A study of Building Information Modeling (BIM) for commercial construction teaching students the basic skills to develop and use BIM on a project for construction planning, documents, cost estimating, and high-quality 3D designs utilizing current industry software. Prerequisite: CSTM 301. Laboratory charge for course. 2 hrs. lect.; 2 hrs. lab.
320 (Cross-listed with ET 320) Professional Preparation. (3) Prepare and enable students to gain skills and experiences with the professional internship search process and career success. Topics include cover letters, resume preparation, networking, job-searching, interviewing, professional business communications, presentations, and industry-appropriate correspondences specific to the major. Not open to students with credit in ET 320. Prerequisites: any ENGR, CSTM, or ET major or minor; sophomore standing or permission of instructor. Activity charge for course.
336 Aggregate Based Materials. (3) A study of residential and commercial uses of aggregate materials as structural systems with a focus upon aggregate, Portland cement concrete, and asphalt cement concrete. Laboratory experiences include application techniques. Prerequisite: CSTM 234. 2 hrs. lect.; 2 hrs. lab.
337 Electrical and Mechanical Systems. (3) A study of electrical and mechanical systems. Content includes electrical, plumbing, and HVAC system design; lighting, acoustics systems selection, and utilization for energy conservation. Sustainable energy options and trends for all systems will also be introduced. Prerequisite: CSTM 234. 3 hrs. lect.
345 Construction Scheduling. (3) A study of planning and scheduling practices used by the construction industry. Scheduling logic, productivity and durations, resource leveling, cost loading, critical path issues, and applications of computer software for the creation of construction project schedules are covered. Prerequisite: MATH 113 with a grade of C- or better, or permission of instructor. Pre- or co-requisites: CSTM 230 and 234, or permission of instructor. 3 hrs. lect.
348 Construction Occupational Safety and Health. (3) A study of the Federal OSHA Act as it applies to the construction industry. Beyond federal regulations, the course includes accident prevention plans, safety education, and documentation preparation. Pre- or co-requisite: CSTM 234 or permission of instructor. 3 hrs. lect.
356 (Cross-listed with ET 356) Introduction to Power Systems. (3) A study of electrical, hydraulic, and pneumatic power systems. Emphasis upon structural and behavioral characteristics of components used in the generation, transmission, and control of power systems used in contemporary industry. Not open to students with credit in ET 356. Prerequisite or Corequisite: PHYS 114 or 115 or 150 or permission of instructor. Laboratory charge for course. 2 hrs. lect.; 2 hrs. lab.
430 Construction Estimating. (3) A study of construction industry estimating techniques and practices for both residential and commercial construction. Students will practice estimating with both simulation exercises and actual construction projects. Computer software will be utilized in this course. Prerequisite: CSTM 230 or permission of instructor. 2 hrs. lect.; 2 hrs. lab.
433 Legal Aspects of Construction. (3) A comprehensive review of legal aspects of construction for managers. Topics include contracts/agreements, liens, bonds, insurance, codes, certification, laws, and ethics. Prerequisites: senior standing, CSTM 345, CSTM 348, and 27 s.h. of CSTM Core courses completed; or permission of instructor. 3 hrs. lect.
434 Construction and Facilities Management. (3) Summarizes the project management issues in both Construction and Facilities Management professions. Includes Construction and Facilities Planning, Capital Projects Management, Real Estate, and Human Resource Management as they link to current technology relevant to new and existing constructed works. Prerequisites: senior standing, CSTM 345, CSTM 348, and 27 s.h. of CSTM Core courses completed; or permission of instructor. 3 hrs. lect.
440 Green and Sustainable Construction. (3) (Multicultural) Comprehensive coverage of green and sustainable construction principles, materials, and methods. Sustainable construction rating systems will be discussed with the focus on LEED criteria. Prerequisite: 75 hours of completed college coursework or permission of instructor. 3 hrs. lect.
455 Construction Management Seminar. (1–3, repeatable to 3 for different topics) Each offering provides students with an opportunity for intensive study in specialty topics reflective of the variety in Construction Management. Prerequisite: junior standing or permission of instructor. Graded S/U only.
460 Soils and Foundations for Construction. (3) A course on basic principles of structural soils and structure foundations, soil classification implications, and applications for the construction industry. Prerequisite: CSTM 260. 3 hrs. lect.
470 Facilities Management Capstone. (3) Summarizes the construction option of study in Facilities Management combining areas of Facilities Planning, Capital Projects Management, Real Estate, and Human Resource Management as they link to current technology. Prerequisites: RSTA 482, ET 346, and senior standing. 3 hrs. lect.
492 Independent Study. (1–3, repeatable to 6) Selection and exploration of a specific area of Construction Management or planning issue, solution of a specific construction industry problem, in-depth study of specific areas of construction, or exploration and/or achievement of a relevant professional certification. Prerequisite: Senior college standing, 21 s.h. of CSTM coursework, and approval of School Director or Program Director. GPA requirement of 2.50 in major.
493 Internship. (3, repeatable to 9) Off-campus work experience in construction. Written weekly reports required. Writing Instruction in the Disciplines (WID) course. Recommend completion before entering last term on campus. A maximum of 9 s.h. may be applied toward major requirements. Prerequisites: junior/senior standing; ENG 280; CSTM 348 or ET 448; a cumulative minimum GPA of 2.00, a minimum GPA 2.00 in the major/minor, and approval of School Director or Program Director. Graded S/U only.

Connect with us: